Navigation

Back to Before you begin

Step 1 Mark the top of the mirror
Step 2 Remove mirror brackets
Step 3 Removing the mirror
Step 4 Cut and strip wires
Step 5 Attach the plug
Step 6 Secure the cable
Step 7 Test mirror defogger

Step 4 - Cut and strip wires

Using the mark at you made earlier, use masking tape to hold the mirror defogger in the position required. The defogger should be mounted even with the top of the head of the tallest person using the mirror and not extend above or beyond the edge of the mirror.

Cut and strip the wires so that the plug can be attached. Be careful not to cut the wires too short.