Navigation

Back to Before you begin

Step 1 Mark the top of the mirror
Step 2 Measure and cut tubing
Step 3 Removing the mirror
Step 4 Driling hole
Step 5 Mount mirror defogger
Step 6 Feed wires and tubing
Step 7 Connect the wires
Step 8 Connect mirror defogger
Step 9 Replace the mirror
Step 10 Test mirror defogger

 

Step 9 - Replacing the mirror

If the mirror defogger does not fit snuggly up against the back of the mirror, corrugated cardboard can be inserted to create a better fit. Typically this is not necessary. Then replace the mirror.

 
  [Next]    Return to main site
Mirror in the Mist | 25 Nashville Ave. Suite 101 | Toronto Ontario M6M 1J2 | Ph: 905.487.4828
All contents © 2002-2005 Mirror in the Mist