Navigation

Back to Before you begin

Step 1 Mark the top of the mirror
Step 2 Measure and cut tubing
Step 3 Removing the mirror
Step 4 Driling hole
Step 5 Mount mirror defogger
Step 6 Feed wires and tubing
Step 7 Connect the wires
Step 8 Connect mirror defogger
Step 9 Replace the mirror
Step 10 Test mirror defogger

Step 2 - Measure and cut tubing

Measure the distance between the top of the mirror and the light fixture to get the length to cut the tubing which will be used to enclose the wires. Cut a length of tubing approximately one-half inch longer than the distance between the mirror and the fixture. In this example a 3/8” plastic water supply tube was cut approximately 2 1/2 inches long. The tubing can be also painted to match the wall or light fixture color.